Init dotfiles

1 files changed, 194 insertions, 0 deletions

diff --git a/vim/vimrc b/vim/vimrc
new file mode 100644
index 0000000..73fbc2a
--- /dev/null
+++ b/vim/vimrc
@@ -0,0 +1,194 @@
+" ==================      DEFAULT .VIMRC VALUES       =====================
+" =========================================================================
+
+" When started as "evim", evim.vim will already have done these settings.
+if v:progname =~? "evim"
+  finish
+endif
+
+" Bail out if something that ran earlier, e.g. a system wide vimrc, does not
+" want Vim to use these default values.
+if exists('skip_defaults_vim')
+  finish
+endif
+
+" Use Vim settings, rather than Vi settings (much better!).
+" This must be first, because it changes other options as a side effect.
+" Avoid side effects when it was already reset.
+if &compatible
+  set nocompatible
+endif
+
+" When the +eval feature is missing, the set command above will be skipped.
+" Use a trick to reset compatible only when the +eval feature is missing.
+silent! while 0
+  set nocompatible
+silent! endwhile
+
+" Allow backspacing over everything in insert mode.
+set backspace=indent,eol,start
+
+set history=200		" keep 200 lines of command line history
+set ruler		" show the cursor position all the time
+set showcmd		" display incomplete commands
+set wildmenu		" display completion matches in a status line
+
+set ttimeout		" time out for key codes
+set ttimeoutlen=100	" wait up to 100ms after Esc for special key
+
+" Show @@@ in the last line if it is truncated.
+set display=truncate
+
+" Show a few lines of context around the cursor.  Note that this makes the
+" text scroll if you mouse-click near the start or end of the window.
+set scrolloff=5
+
+" Do incremental searching when it's possible to timeout.
+if has('reltime')
+  set incsearch
+endif
+
+" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it
+" confusing.
+set nrformats-=octal
+
+" REMOVED: No need for Win32GUI support
+" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries.
+" if has('win32')
+"   set guioptions-=t
+" endif
+
+" Don't use Q for Ex mode, use it for formatting.  Except for Select mode.
+" Revert with ":unmap Q".
+map Q gq
+sunmap Q
+
+" CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
+" so that you can undo CTRL-U after inserting a line break.
+" Revert with ":iunmap <C-U>".
+inoremap <C-U> <C-G>u<C-U>
+
+" In many terminal emulators the mouse works just fine.  By enabling it you
+" can position the cursor, Visually select and scroll with the mouse.
+" Only xterm can grab the mouse events when using the shift key, for other
+" terminals use ":", select text and press Esc.
+if has('mouse')
+  if &term =~ 'xterm'
+    set mouse=a
+  else
+    set mouse=nvi
+  endif
+endif
+
+" Only do this part when Vim was compiled with the +eval feature.
+if 1
+
+  " Enable file type detection.
+  " Use the default filetype settings, so that mail gets 'tw' set to 72,
+  " 'cindent' is on in C files, etc.
+  " Also load indent files, to automatically do language-dependent indenting.
+  " Revert with ":filetype off".
+  filetype plugin indent on
+
+  " Put these in an autocmd group, so that you can revert them with:
+  " ":augroup vimStartup | exe 'au!' | augroup END"
+  augroup vimStartup
+    au!
+
+    " When editing a file, always jump to the last known cursor position.
+    " Don't do it when the position is invalid, when inside an event handler
+    " (happens when dropping a file on gvim) and for a commit message (it's
+    " likely a different one than last time).
+    autocmd BufReadPost *
+      \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
+      \ |   exe "normal! g`\""
+      \ | endif
+
+  augroup END
+
+  " Quite a few people accidentally type "q:" instead of ":q" and get confused
+  " by the command line window.  Give a hint about how to get out.
+  " If you don't like this you can put this in your vimrc:
+  " ":augroup vimHints | exe 'au!' | augroup END"
+  augroup vimHints
+    au!
+    autocmd CmdwinEnter *
+	  \ echohl Todo | 
+	  \ echo 'You discovered the command-line window! You can close it with ":q".' |
+	  \ echohl None
+  augroup END
+
+endif
+
+" Switch syntax highlighting on when the terminal has colors or when using the
+" GUI (which always has colors).
+if &t_Co > 2 || has("gui_running")
+  " Revert with ":syntax off".
+  syntax on
+
+  " I like highlighting strings inside C comments.
+  " Revert with ":unlet c_comment_strings".
+  let c_comment_strings=1
+endif
+
+" Convenient command to see the difference between the current buffer and the
+" file it was loaded from, thus the changes you made.
+" Only define it when not defined already.
+" Revert with: ":delcommand DiffOrig".
+if !exists(":DiffOrig")
+  command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
+		  \ | wincmd p | diffthis
+endif
+
+if has('langmap') && exists('+langremap')
+  " Prevent that the langmap option applies to characters that result from a
+  " mapping.  If set (default), this may break plugins (but it's backward
+  " compatible).
+  set nolangremap
+endif
+
+" ==================================================================================
+" ======================   CUSTOM CONFIGURATIONS BELOW   ===========================
+" ==================================================================================
+
+" Indentation changes
+set tabstop=4
+set softtabstop=4
+set shiftwidth=4
+set expandtab
+set autoindent
+
+" Search highlights
+set hlsearch
+set incsearch
+
+" Toggles numbers on the side
+set number
+
+" Splits window towards right
+set splitbelow splitright
+
+" Change movement between windows
+map <C-h> <C-w>h
+map <C-j> <C-w>j
+map <C-k> <C-w>k
+map <C-l> <C-w>l
+
+" Change autocomplete "
+map <C-a> <C-n>
+
+" Maps opening the :NERDTree plugin with Ctrl-T
+nnoremap <c-t> :NERDTree<CR>
+
+" Automatically open NERDTree upon open "
+autocmd VimEnter * NERDTree | wincmd p
+
+" Automatically close NERDTree if it is the only window remaining "
+autocmd BufEnter * if tabpagenr('$') == 1 && winnr('$') == 1 && exists('b:NERDTree') && b:NERDTree.isTabTree() | quit | endif
+
+" Show NERDTree on every tab "
+autocmd BufWinEnter * if &buftype != 'quickfix' && getcmdwintype() == '' | silent NERDTreeMirror | endif
+
+" Show hidden files in NERDTree "
+let NERDTreeShowHidden=1
+